Even the 2-wire BUS intercom. Without touching anything.
The new RING-BRIDGE + SwitchBot Bot solution opens the entrance even where wires can't be connected. Via BLE. Without opening the intercom. Zero warranty issues.
If you have an intercom on a digital 2-wire BUS, or if your electrician refuses to solder onto the button's poles, this is the solution. A small robot physically presses the button, wirelessly controlled by our RING-BRIDGE.
Two situations where connecting directly to the intercom's wires doesn't work.
RING12® connects to the 2 poles of the door-opening button, but there are cases where this is not possible or not acceptable.
2-wire BUS intercom
Modern intercoms on a digital BUS use the same 2 wires for power and data. You cannot connect to the internal button poles without interfering with the BUS protocol and causing malfunctions.
The electrician refuses
Opening the intercom body and soldering 2 wires onto the door-opening button's poles is an operation many electricians refuse: it voids the product's warranty and can compromise the intercom's own functionality.
Risk of failure
Even when technically feasible, an internal soldering operation exposes you to short circuits, damage to the electronic board and complete loss of intercom functionality.
RING-BRIDGE + SwitchBot Bot: no wires, no risk.
Our RING-BRIDGE receives the command over the internet and transmits it wirelessly to the SwitchBot Bot device (a compatible third-party product) mounted on the button. The bot physically presses the button. You don't touch anything inside the intercom.
Four steps. In twenty minutes.
No electrician, no soldering, no changes to the system. You can do it all yourself.
Position the SwitchBot Bot
Attach the SwitchBot Bot device directly over the intercom's door-opening button with the double-sided tape included in the SwitchBot package.
Connect the RING-BRIDGE to Wi-Fi
Turn on the RING-BRIDGE and connect it to the apartment's Wi-Fi network via the configuration app.
Pair the two devices
The RING-BRIDGE automatically detects the SwitchBot Bot via BLE within a range of a few meters.
Activate on Keyless
Configure the device in the Keyless dashboard and the gate is ready to open from a web page.
"The robot presses the button.
You don't touch anything."
No intercom gets opened, no warranty gets voided. The SwitchBot Bot physically presses the door-opening button from the outside, exactly like a finger would.
SwitchBot Bot™: the mechanical actuator integrated by Keyless®.
SwitchBot Bot™ is a product by SwitchBot Inc., compatible with our RING-BRIDGE. Keyless® integrates it through its own cloud services: you open the gate from the web page as always, without managing anything manually. The bot attaches over the intercom button with the double-sided tape included in its package.
SwitchBot Bot™ is a registered trademark of SwitchBot Inc. Keyless® is not affiliated with SwitchBot Inc. Keyless® provides the RING-BRIDGE and the integration that enables remote control of the device through its own cloud services.
Before and after the Bridge solution.
The difference between the old wired approach and the new wireless solution.
Direct connection to the wires
- Incompatible with 2-wire BUS intercoms
- Requires opening the intercom
- Soldering onto the button's internal poles
- Intercom's warranty voided
- Many electricians refuse
- Risk of short circuit or board failure
Wireless mechanical actuator
- Works with any intercom, even BUS
- No opening of the intercom
- No soldering, no additional wires
- Intercom's warranty completely intact
- DIY installation in a few minutes
- Reliable, low-power BLE communication
Why RING-BRIDGE + SwitchBot Bot is the right choice.
Zero wires
No electrical connection to make. No cables, no soldering, no changes to the existing system.
Warranty preserved
The intercom is never opened or modified. The product's warranty remains 100% valid.
2-wire BUS OK
Compatible with all intercoms, including modern digital systems on a 2-wire BUS where direct connection is impossible.
Quick installation
Double-sided tape and a configuration app: the system is operational in under twenty minutes, with no technician to call.
Do you have a 2-wire BUS intercom or an electrician who refuses to intervene?
Tell us about your case. The RING-BRIDGE + SwitchBot Bot solution is probably what you need: no wires, no risk, everything working.
Request a free consultation